IMPORTANT: - Remote control D200 is necessary to install the clock. After installation remote control is needed only occasionally, e.g. for setup of clock without synchronization. Therefore one remote control is sufficient for organization with several of these clocks. Remote control is not included in clock accessories and needs to be ordered separately (D200) in needed quantity.
- Clock is for interior use only.
FEATURES - D202PW/100/4: - Single-sided indoor digital clock with HH:MM time display format and 100 mm digit height.
- Metal cabinet complete with transparent plexiglass and plastic side panels with increased water resistance. Dimensions: 518 x 170 x 65 mm
- Cable entry through bushings .
- Independent operation without synchronization or slave impulse line synchronization. If SONTEK master clock is used, time and date are set up automatically.
- Possibility to connect a GPS receiver for time synchronization from the GPS satellite system
- In addition to basic synchronization, it is possible to add additional synchronization via an external DHF receiver (wireless transmission) or synchronization via LAN from an NTP server (own or public from the Internet)
- Infrared-based remote control is required, but may not be available every hour (D200 must be ordered separately)
As standard, the power supply is solved by an internal power supply (PG11 bushing), it is also possible to select an external power supply with an adapter with a safe voltage of 12VDC or PoE (only for the version with NTP additional synchronization)
- Possibility of automatic alternating display of two or three data (time / date, time / temperature, time / date / temperature) with adjustable display length 1-9 seconds
- The SENSOR 1 input allows the connection of a contact thermometer T1 and optional
- The SENSOR 2 input can be used for contact measurement T2 or for temperature measurement using infrared radiation or for humidity measurement
- Stopwatch forward, backward in M: SS or H: MM formats controlled by remote control, possibility to display split time.
- Reverse operation - the time until midnight is displayed with automatic cancellation of the mode after reaching midnight
- Alarm function - possibility to program 9 times for optical signaling. "PIP" appears on the display at the set time.
- Possibility to adjust the brightness in 9 steps or automatically according to the ambient light
- The size and design are designed for operations with increased humidity production halls, wellness, swimming pools, etc.
MINIMAL CONFIGURATION - Single-sided LED display 4x100mm - red
- Power supply 230V/50Hz
CONFIGURABLE OPTIONS :
The configurator allows modification of minimum configuration according to customer requirements. This chapter describes all possibilities.
COLOUR:
- RED – Red colour LED display. Standard option.
- GREEN – Green colour LED display.
- YELLOW – Yellow colour LED display.
- BLUE – Blue colour LED display.
SENSOR 1: - Contact thermometer T1 input, standard option (probe D111SQ/RJ, needs to be ordered separately)
SENSOR 2:
There are two inputs for temperature and humudity measurement to connect probes. Option allows to choose the probe.
- Contact thermometer T2 input, standard option (probe D111SQ/RJ, needs to be ordered separately)
- Infrared thermometer input (probe D511RJ, needs to be ordered separately)
- Humidity probe input (probe D411RJ, needs to be ordered separately)
ADDITIONAL SYNCHRONIZATION: - NONE - only slave impulse line and GPS synchronization.
- DHF - Input for wireless DHF transmitter/receiver D215. If main synchronization is used (for instance GPS receiver is connected), communication is set to transmit coded time protocol (MASTER). If main synchronization is not used, clock is in receive mode (SLAVE). Several clocks in "SLAVE" mode can be connected to one "MASTER" clock and be synchronized by this "MASTER" clock. Information about temperature can also be communicated via this protocol.
NTP – connector for NTP web server synchronization. Configuration allows set two IP addresses. The time is synchronized from NTP server. You can choose your private NTP server or NTP server on the network.
POWER: - 230V/50Hz – built-in power supply,
- 12VDC – safe voltage power supply 12VDC. DC connector 5,5/2,1 mm.
- PoE - power over ethernet, only if additional synchronization is NTP